Kontron VMP1 with Netbootloader Manuel d'utilisateur télécharger pdf (Page 88)

NetBootLoader VMP1

SYNTAX:

logout

DESCRIPTION: A remote telnet session will be terminated with the command

“logout”. No application is loaded and started if the session is

terminated with “logout”. The NetBootLoader waits for a new session

to be initiated or for a command entry from the serial console.

FUNCTION: Display listing of the current ftp server directory

SYNTAX:

DESCRIPTION: To display a listing of the current ftp server directory the command

“ls” is used. This command downloads the listing to the data buffer

and then the listing is displayed. Any previously loaded image in the

data buffer is overwritten. If an attempt is then made to program the

FLASH after the “ls” command has been issued it will fail.

FUNCTION: Display visible memory

SYNTAX:

md [<adr>]

where:

md command

<adr> parameter: value: hexadecimal

starting address of a visible memory area

DESCRIPTION: To display a visible memory area the command “md” is used. The

first time the command “md” is issued, visible memory contents

starting at the address 0x0 are displayed if no “<adr>” parameter is

used. If issued again without the “<adr>” parameter, the display starts

with the end address of the previous display. Data is displayed as

hexadecimal 32-bit words and as ASCII dump.

LOGOUT

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 119 120

Pas de commentaire

Kontron VMP1 with Netbootloader Manuel d'utilisateur Page 88