Kontron VMP1 with Netbootloader Manuel d'utilisateur télécharger pdf (Page 104)

VMP1 VMP1-IO1 Module (Optional)

ID 26037, Rev. 01Page A - 8 ® 2002 PEP Modular Computers GmbH

F Board Installation

In order to keep the installation process as simple and easy as possible please follow

the recommended order of work:

1. Instal the PMC module on the VMP1-IO1

2. Instal the package, VMP1-IO1 plus PMC module, on the baseboard (in this case

the VMP1)

Installation of the VMP1-IO1 Module on the VMP1 Baseboard

3. Place the VMP1-IO1 exactly above the VMP1

4. Plug them togethor

5. Use 4 screws (2.5

× 6 mm) to secure the board to the VMP1

PMC Module Installation

6. Place the EMC gasket on the bezel of your PMC-Module

7. Push the PMC bezel into the window of the front-panel of the VMP1 and plug the

connectors together.

8. Use three screws (M2.5

× 6mm) to secure the module to the board

ESD Equipment!

Your carrier board and PMC module contain electrostatically sen-

sitive devices. Please observe the necessary precautions to avoid

damage to your board:

• Discharge your clothing before touching the assembly. Tools

must be discharged before use.

• Do not touch components, connector-pins or traces.

• If working at an anti-static workbench with professional dis-

charging equipment, please do not omit to use it.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 119 120

Pas de commentaire

Kontron VMP1 with Netbootloader Manuel d'utilisateur Page 104