Kontron AT8050 Manuel d'utilisateur télécharger pdf (Page 49)

33 AT8050

www.kontron.com

3.3.2 Installing Memory

On an anti-

static plane, place the board so that you

are facing the front plate connectors

Remove the memory protection top cover.

Insert the memory module into any available

socket, aligning the notches on the module with the

socket’s key inserts.

1- Insert the memory module in the connector

using

your thumbs.

2- Eject partially the memory module, using the

connector latches while applying some pressure on

the top to avoid the full removal of the modules.

3- Fully Reseat the modules in the connector

using

your thumbs.

4- Repeat steps 2 and 3 a second time.

5- Push down the memory module until the

retaining clips lock on each side.

Repeat these steps to populate the other socket.

To remove a memory module from a socket, push

sideway the retaining clips on each side of the

socket, to release the module. Pull out the memory

from the socket.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 164 165

Pas de commentaire

Kontron AT8050 Manuel d'utilisateur Page 49