Kontron NetBootLoader Manuel d'utilisateur télécharger pdf (Page 75)

ID 1022-8317, Rev. 2.0

Command SyntaxNetBootLoader

Page 67

RUN (ASMP)

FUNCTION: (Loads and) starts (a) bootable image(s)

SYNTAX:

run [-c] [<numcore0> [<numcore1>]]

where:

run command

-c option: check

do not start the image(s) if the “md5” check failed

<numcore0> parameter: string

0, 1, 2, 3

load and start image with the number <numcore0>

from NBL Flash on core 0

start image in the data buffer on core 0

- 1

do not start image on core 0

<numcore1> parameter: string

0, 1, 2, 3

load and start image with the number <numcore0>

from NBL Flash on core 1

start image in the data buffer on core 1

- 1

do not start image on core 1

DESCRIPTION: This command is used to (load and) start (a) boot images for both

cores.

If the image to be started is located in the NBL Flash, it is loaded to

the data buffer and then started.

If the image to be started is already located in the data buffer it is

started.

When used with the “-c” option, only a valid image is started. If both

cores are to be used, then both images must be in order or neither

image will be started. Refer to the LOAD command for further

information.

Invoking RUN without options starts images in the data buffer.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 85 86

Pas de commentaire

Kontron NetBootLoader Manuel d'utilisateur Page 75