Kontron COMe-bP5020 Manuel d'utilisateur télécharger pdf (Page 33)

www.kontron.com

User Guide

COMe-bP5020

3 Configuration

3.1 DIP Switch Configuration

The COMe-bP5020 is equipped with one 4-bit DIP switch, SW1, for board configuration.

Table 13: DIP Switch SW1 Configuration

The default position for the above settings is: OFF

SWITCH SETTING DESCRIPTION

1 OFF Uses the SerDes configuration which is defined via the U-Boot “sconf” command.

ON The COMe-bP5020 uses a fail-safe SerDes configuration.

With this configuration the SerDes lanes are powered off.

2 OFF Boot from the standard SPI boot flash

ON Boot from the recovery SPI boot flash

3 OFF The SDHC interface is routed to the onboard MicroSD

ON The SDHC interface is routed to the COM Express connector

4OFFReserved

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 70 71

Pas de commentaire

Kontron COMe-bP5020 Manuel d'utilisateur Page 33