Kontron NSN2U IP Network Server Manuel d'utilisateur télécharger pdf (Page 33)

Figure 15. Cautions for Handling Processors

Removing a Processor

1. Loosen the four captive screws on the corners of the heat sink with a #2 Phillips

screwdriver. (

Figure 16, “A”)

2. Twist the heat sink slightly to break the seal between the heat sink and the

processor. (“B”)

3. Lift the heat sink from the processor. If it does not pull up easily, twist the heat

sink again.

Note: Do not force the heat sink from the processor. Doing so could damage the

processor.

Figure 16. Removing the Heat Sink

4. Open the socket by pushing the lever handle down and away from the socket

to release it. (“A” and “B” in

Figure 17)

Figure 17. Using the Socket Lever

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 102 103

Pas de commentaire

Kontron NSN2U IP Network Server Manuel d'utilisateur Page 33