Kontron CP6002 Manuel d'utilisateur télécharger pdf (Page 37)

CP6002 Introduction

ID 1036-6431, Rev. 3.0 Page 1 - 17

P R E L I M I N A R Y

Security

TPM Trusted Platform Module (TPM) 1.2 for enhanced hardware- and software-

based data and system security (on request)

Software

uEFI BIOS AMI Aptio®, AMI’s next-generation BIOS firmware based on the uEFI Specifi-

cation and the Intel Platform Innovation Framework for EFI.

• LAN boot capability for diskless systems (standard PXE)

• Redundant image; automatic fail-safe recovery in case of a damaged

image

• Non-volatile storage of setting in the SPI Flash (battery only required for

the RTC)

• Compatibility Support Module (CSM) providing legacy BIOS compatibil-

ity based on AMIBIOS8

• Command shell for diagnostics and configuration

• uEFI shell commands executable from mass storage device in a Pre-OS

environment (open interface)

• IPMI support in the command shell

Software IPMI Board Management Controller Firmware providing the following features:

• The BMC is accessible via two IPMBs and one KCS interface with inter-

rupt support

• The BMC Firmware can be updated in field through all supported inter-

faces using the function “fwum...” of the open-source tool “ipmitool”. For

further information on the ipmitool refer to the sourceforge.net website.

• Two BMC Flash banks with automatic roll-back capability in case of an

upgrade firmware failure

• Board supervision and control extensions such as board reset, power

and SPI Flash control, and boot order configuration

Operating Systems

The board is offered with various Board Support Packages including Windows

and Linux operating systems. For further information concerning the operating

systems available for the CP6002, please contact Kontron.

Table 1-2: CP6002 Main Specifications (Continued)

FEATURES SPECIFICATIONS

1 2 ... 32 33 34 35 36 37 38 39 40 41 42

Pas de commentaire

Kontron CP6002 Manuel d'utilisateur Page 37