Kontron SMARC Evaluation Carrier Manuel d'utilisateur télécharger pdf (Page 31)

User’s Guide

www.kontron.com

7.4

Jumper J36 – LVDS Panel Color Depth – Module LVDS

Jumpers J36 is used for selecting the color depth of the Module LVDS display. Most Modules will use 6 bit color packing

on the Module LVDS, and J36 should be inserted. This jumper has an effect only when the LVDS display in use has the

corresponding 6 bit

8 bit color pack selection capability.

Jumper

Position

Function

J36

Inserted

Sets 6 bit per color packing on the display (if the display supports

this feature)

Not inserted

Sets 8 bit per color packing on the display (if the display supports

this feature)

7.5

Jumper J49 – SD Card WP

J49 is used to enable or disable the SDIO Write Protect.

Jumper

Position

Function

J49

Inserted

Write access enabled for the SD card

Not inserted

SD card is write protected

7.6

Jumper J58 – LVDS Panel Color Depth – Carrier LVDS

Jumper

Position

Function

J58

Inserted

Sets 6 bit per color packing on the display (if the display supports

this feature)

Not inserted

Sets 8 bit per color packing on the display (if the display supports

this feature)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 73 74

Pas de commentaire

Kontron SMARC Evaluation Carrier Manuel d'utilisateur Page 31