Kontron KTUS15-mITX - 1.1 Basic Manuel d'utilisateur télécharger pdf (Page 39)

KTD-00774-G KTUS15/mITX Page 39 of 84

4.12.3 USB Connector 6/7 (USB6/7)

USB Ports 6 and 7 are supplied on the internal USB6, USB7 pinrow connector. USB6/7 are controlled only

by the EHCI USB 2.0 controller and therefore they can only run USB2.0 HiSpeed (480Mbps).

Note: If a USB device is not compatible with USB2.0 High Speed, it will not work if connected to USB6/7.

Note

Pull

U/D

Ioh/Iol Type

Signal PIN# Signal Type

Ioh/Iol

Pull

U/D

Note

PWR

USB5V

PWR

USB6-

USB7-

USB6+

USB7+

PWR

GND

PWR

KEY

Signal Description

USB6+ USB6-

USB7+ USB7-

Differential pair works as Data/Address/Command Bus.

USB5V 5V supply for external devices. Fused with 2.0A resettable fuse.

Note 1: The 5V supply for the USB devices is fused onboard with a 2.0A resettable fuse. The supply is

common to both channels. USB5V is supplied during powerdown to allow wakeup on USB device activity.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 83 84

Pas de commentaire

Kontron KTUS15-mITX - 1.1 Basic Manuel d'utilisateur Page 39