Kontron CP-RIO3-04S Manuel d'utilisateur télécharger pdf (Page 23)

CP-RIO3-04S Functional Description

ID 1036-1669, Rev. 1.0 Page 2 - 3

2. Functional Description

2.1 Board Interfaces

2.1.1 VGA Interface

The CP-RIO3-04S provides one 15-pin, D-Sub VGA connector, J7, on the front panel. This

connector is used to connect an analog VGA (CRT) monitor to the CP-RIO3-04S.

The following figure illustrates the D-Sub VGA connector J7.

Figure 2-1: D-Sub VGA Connector J7

The following table indicates the pinout of the D-Sub VGA connector J7

Table 2-1: D-Sub VGA Connector J7 Pinout

PIN SIGNAL FUNCTION I/O

1 Red Red video signal output O

2 Green Green video signal output O

3 Blue Blue video signal output O

4 NC Not connected --

5 - 8 GND Signal ground --

9 VCC Power +5V, 140 mA fuse protection O

10 GND Signal ground --

11 NC Not connected --

12 SDA I²C data (EDID) I/O

13 Hsync Horizontal synchronization TTL Out

14 Vsync Vertical synchronization TTL Out

15 SCL I²C clock (EDID) I/O

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 37 38

Pas de commentaire

Kontron CP-RIO3-04S Manuel d'utilisateur Page 23