Kontron KBox C-101 Manuel d'utilisateur télécharger pdf (Page 22)

7. System Overview KBox C-101 – User’s Guide (Version 2.00)

7.3.1. X101 - Power Input Connector

The 3-pin connector (X101,

Fig. 10) provides the power connection of the KBox C-101 to the appropriate DC main power

supply. For pin assignments refer to the subsection

18.1.1.

The external cable connector is a Phoenix PSC 1,5/ 3-M, 3-pin plug with an SCT-D-SUB 9-KG housing. This power plug is

delivered along with the KBox C-101. Please observe the section

12.1 “Connecting to DC Main Power Supply”. The mating

connector is a Phoenix PSC 1,5/ 3-F connector.

Pin Signal Name

+24 VDC (input)

Functional Earth

0V (input)

Pin 1

Pin 2

Pin 3

Fig. 12: X101 - 24VDC power input connector

7.3.2. X102/X103/X104 - Ethernet Connectors (ETH)

These connectors (X102/X103/X104, Fig. 10) are Gigabit Ethernet 10/100/1000 Mbit/s, IEEE 1588 capable interfaces.

The connectors are standard 8-pin RJ45 type connectors with status LEDs:

 Activity/link: green = link up; green blinking = activity.

 Speed: off, green, yellow (10/100/1000 MBit/s).

For pin assignment refer to subsection

18.1.6.

7.3.3. X105/X106 - USB 3.0

The KBox C-101 provides two USB 3.0/2.0 interfaces. These connectors (X105/X106,

Fig. 10) allow connection of USB 3.0

or USB 2.0 compatible devices to the system. For pin assignment refer to subsection

18.1.5.

7.3.4. X107/X108 - USB 2.0

The KBox C-101 provides two USB 2.0/1.1 interfaces. These connectors (X107/X108,

Fig. 10) allow connection of USB-

compatible devices to the system. For pin assignment refer to subsection

18.1.4.

7.3.5. X109 - DisplayPort

This is a DisplayPort compliant interface realized using a standard DisplayPort connector. An external (digital) display can

be connected to the DisplayPort connector (X109,

Fig. 10). For pin assignment refer to subsection 18.1.3.

20 www.kontron.com

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 70 71

Pas de commentaire

Kontron KBox C-101 Manuel d'utilisateur Page 22