Kontron ETX-DC Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Kontron ETX-DC. Kontron ETX-DC User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 81
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
If it’s embedded, it’s Kontron
ETX-DC®
Document Revision: 1.18
Vue de la page 0
1 2 3 4 5 6 ... 80 81

Résumé du contenu

Page 1 - ETX-DC®

If it’s embedded, it’s Kontron ETX-DC® Document Revision: 1.18

Page 2

ETX-DC®/ Specifications 5 3 Specifications 3.1 Functional Specifications Processor: Intel® ATOM™ N270 » Cache: 512MB L2 » Clock Frequency:

Page 3 - » Table of Contents «

ETX-DC®/ Specifications 6 Trustes Platform Module (TPM) » Can be equipped optionally Super I/O: WINBOND W83627DHG-P LPC Super I/O » Serial Por

Page 4

ETX-DC®/ Specifications 7 3.4 Block Diagram

Page 5

ETX-DC®/ Specifications 8 3.5 Mechanical Specifications Dimensions » 95.0 mm x 114.0 mm (3.75” x 4.5”) » Height approx. 12 mm (0.4”) 3.6 Ele

Page 6 - 1 User Information

ETX-DC®/ Specifications 9 3.7 Environmental Specifications Temperature Operating: (with Kontron Embedded Modules GmbH heat-spreader plate ass

Page 7 - 1.6 Technical Support

ETX-DC®/ Specifications 10 3.8 MTBF The following MTBF (Mean Time Between Failure) values were calculated using a combination of manufacturer

Page 8 - 2 Introduction

ETX-DC®/ ETX® Connectors 11 4 ETX® Connectors The pinouts for ETX® Interface Connectors X1, X2, X3, and X4 are documented for convenient refe

Page 9 - 2.3 ETX® Benefits

ETX-DC®/ ETX® Connectors 12 4.3 Connector X1 (PCI bus, USB, Audio) Pin Signal Pin Signal Pin Signal Pin Signal 1 GND 2 GND 51 VCC * 52 VCC

Page 10 - 3 Specifications

ETX-DC®/ ETX® Connectors 13 4.3.1 Connector X1 Signal Levels Pin 1-50 [Power | PCI |USB | AUDIO] Pin Signal Description Type Termination Comm

Page 11

ETX-DC®/ ETX® Connectors 14 Pin 51–100: [Power | PCI |USB | AUDIO] Pin Signal Description Type Termination Comment 51 VCC Power +5V PWR - - 52

Page 13

ETX-DC®/ ETX® Connectors 15 4.3.2 Connector X1 Signal Description PCI Bus The implementation of this subsystem complies with the ETX® Specifi

Page 14 - Humidity

ETX-DC®/ ETX® Connectors 16 3.3V Power Supply for External Components The ETX®-DC offers the ability to connect external 3.3V devices to the o

Page 15 - 3.8 MTBF

ETX-DC®/ ETX® Connectors 17 4.4.1 Connector X2 Signal Levels Pin 1–50: [Power | ISA] Pin Signal Description Type Termination Comment 1 GND Gr

Page 16 - 4 ETX® Connectors

ETX-DC®/ ETX® Connectors 18 Pin 51-100: [Power | ISA] Pin Signal Description Type Termination Comment 51 VCC Power +5V PWR - - 52 VCC Power +5

Page 17

ETX-DC®/ ETX® Connectors 19 4.4.2 Connector X2 Signal Description ISA Bus Slot The implementation of this subsystem complies with the ETX® S

Page 18

ETX-DC®/ ETX® Connectors 20 4.5 Connector X3 (VGA, LCD, Video, COM1 and COM2, LPT/Floppy, Mouse, Keyboard) 4.5.1 Alternative pinning Flat-Pa

Page 19

ETX-DC®/ ETX® Connectors 21 Parallel Port / Floppy Interfaces You can configure ETX®-DC’s parallel port interfaces as conventional PC parallel

Page 20

ETX-DC®/ ETX® Connectors 22 4.5.2 Connector X3 (Signal Levels) Pin 1–50: [Power | VGA |LCD| TV] Pin Signal Description Type Termination Comm

Page 21 - 4.4 Connector X2 (ISA Bus)

ETX-DC®/ ETX® Connectors 23 Pin 51–100: [Power | COM |LPT | Floppy | KB/MS/IR] Pin Signal Description Type Termination Comment 51 LPT | FLPY#

Page 22 - Pin 1–50: [Power

ETX-DC®/ ETX® Connectors 24 4.6 Connector X3 Signal Description VGA Output LVDS Flat Panel Interface (JILI) The user interface for flat pane

Page 23 - Pin 51-100: [Power

www.kontron.com » Table of Contents « 1 User Information ... 1 1.1 A

Page 24 - ISA Bus Slot

ETX-DC®/ ETX® Connectors 25 The mouse uses I/O and IRQ resources. The BIOS allocates the resources during POST configuration. The resources ar

Page 25 - Keyboard)

ETX-DC®/ ETX® Connectors 26 4.7 Connector X4 Subsystems 4.7.1 Connector X4 (IDE 1, IDE 2, Ethernet, Miscellaneous) Pin Signal Pin Signal P

Page 26

ETX-DC®/ ETX® Connectors 27 4.7.2 Connector X4 (Signal Levels) Pin 1–50: [Power | IDE |Ethernet | Power control | Misc] Pin Signal Descriptio

Page 27

ETX-DC®/ ETX® Connectors 28 Pin 51–100: [Power | IDE |Ethernet | Misc] Pin Signal Description Type Termination Comment 51 SIDE_IOW# Secondary

Page 28

ETX-DC®/ ETX® Connectors 29 4.7.3 Connector X4 Signal Description IDE Ports The IDE host adapter is capable of DMA-100 operation and supports

Page 29

ETX-DC®/ ETX® Connectors 30 External SMI Interrupt: Contact Kontron Embedded Modules GmbH technical support for information on this feature. M

Page 30 - Parallel Port

ETX-DC®/ ETX® Connectors 31 4.8 SDVO Connector J9 4.8.1 Location of the connector The feature connector J9 is on the bottom side of the mo

Page 31 - 4.7 Connector X4 Subsystems

ETX-DC®/ ETX® Connectors 32 4.8.3 Connector and Flat Foil Cable Connector and flat foil cable information for the SDVO connector (J9) locate

Page 32

ETX-DC®/ ETX® Connectors 33 When you have as boot display device SDVO enabled and you have installed a windows operating system then after the

Page 33

ETX-DC®/ Special Features 34 5 Special Features 5.1 Watchdog Timer The watchdog timer is implemented within the Winbond W83627HG. The WDT ca

Page 34

www.kontron.com 4.5.1 Alternative pinning ...

Page 35 - Miscellaneous Circuits

ETX-DC®/ Design Considerations 35 6 Design Considerations 6.1 Thermal Management A heat-spreader plate assembly is available from Kontron Em

Page 36 - 4.8 SDVO Connector J9

ETX-DC®/ Design Considerations 36 6.2 Heat spreader Documentation of ETX-DC® Heatspreader and Cooling Solutions are provided at the customer

Page 37 - » Hirose - FH12-45S-0.5SH

ETX-DC®/ Design Considerations 37 6.3.2 Location and Pinout of fan connector J8

Page 38

ETX-DC®/ Important Technology Information 38 7 Important Technology Information The following technological information is designed to give t

Page 39 - 5 Special Features

ETX-DC®/ Important Technology Information 39 The following events resume the system from S1: » Power Button » USB Wake Events » PCI Bus signal

Page 40 - 6 Design Considerations

ETX-DC®/ System Resources 40 8 System Resources 8.1 Interrupt Request (IRQ) Lines 8.1.1 In 8259 PIC mode IRQ # Used For Available Comment

Page 41 - 6.2 Heat spreader

ETX-DC®/ System Resources 41 8.1.2 In APIC mode IRQ # Used For Available Comment 0 Timer0 No 1 Keyboard No 2 Slave 8259 No 3 COM2 No Note

Page 42

ETX-DC®/ System Resources 42 8.2 Memory Area Upper Memory Used for Available Comment C0000h – CFFFFh VGA BIOS No D0000h – DFFFFh Yes ISA bu

Page 43 - 7.1.3 More interrupts

ETX-DC®/ System Resources 43 The standard ETX®-DC Power management BIOS does support MARS (Mobile Application platform for Rechargeable System

Page 44

ETX-DC®/ BIOS Operation 44 9 BIOS Operation The module is equipped with AMI® BIOS, which is located in an onboard SPI serial flash memory. Yo

Page 45 - 8 System Resources

www.kontron.com 8.1.2 In APIC mode ...

Page 46 - 8.1.2 In APIC mode

ETX-DC®/ BIOS Operation 45 Legend Bar Use the keys listed in the legend bar on the bottom to make your selections or exit the current menu. Th

Page 47 - 8.5 Inter-IC (I2C) Bus

ETX-DC®/ BIOS Operation 46 9.3 BIOS Setup Menus 9.3.1 Main Menu Feature Option Description System Time [hh:mm:ss] <Tab>, <Shift-T

Page 48 - 8.7 JILI-I2C Bus

ETX-DC®/ BIOS Operation 47 Module Component Steppings Module Software Revisions

Page 49 - 9 BIOS Operation

ETX-DC®/ BIOS Operation 48 Current LVDS Configuration 9.3.3 Advanced Menu

Page 50 - Legend Bar

ETX-DC®/ BIOS Operation 49 CPU Configuration Menu Feature Option Description MAX CPUID Value Limit Enabled Disabled Enables the MAX CPUID Va

Page 51 - 9.3 BIOS Setup Menus

ETX-DC®/ BIOS Operation 50 IDE Configuration Menu Feature Option Description ATA/IDE Configuration Disabled Compatible Enhanced Disables or s

Page 52

ETX-DC®/ BIOS Operation 51 IDE Device Configuration Menu Feature Option Description Type Not Installed Auto CD/DVD ARMD Selects the type of t

Page 53

ETX-DC®/ BIOS Operation 52 SuperIO Configuration Menu Feature Option Description OnBoard Floppy Controller Disabled Enabled N/A Enables / Di

Page 54 - CPU Configuration Menu

ETX-DC®/ BIOS Operation 53 External SIO Feature Option Description External COMA Disabled 3F8h/IRQ10 3F8h/IRQ11 2F8h/IRQ10 2F8h/IRQ11 3E8h/IR

Page 55 - IDE Configuration Menu

ETX-DC®/ BIOS Operation 54 ACPI Configuration Menu Feature Option Description ACPI Version Features ACPI v1.0 ACPI v2.0 ACPI v3.0 Selects the

Page 56 - Description

ETX-DC®/ User Information 1 1 User Information 1.1 About This Document This document provides information about products from Kontron Embedd

Page 57 - SuperIO Configuration Menu

ETX-DC®/ BIOS Operation 55 ACPI Cooling Options Menu Feature Option Description Active Trip Point Disabled 40°C 45°C 50°C 55°C … 110°C Set th

Page 58 - External SIO

ETX-DC®/ BIOS Operation 56 45°C 50°C 55°C … 110°C USB Configuration Menu Feature Option Description Legacy USB Support Enabled Disabled Aut

Page 59 - ACPI Configuration Menu

ETX-DC®/ BIOS Operation 57 USB Mass Storage Device Configuration Feature Option Description USB Mass Storage Reset Delay 10 Sec 20 Sec 30 Sec

Page 60 - ACPI Cooling Options Menu

ETX-DC®/ BIOS Operation 58 Hardware Health Configuration Menu Feature Option Description H/W Health Function Disabled Enabled Enables and Dis

Page 61 - USB Configuration Menu

ETX-DC®/ BIOS Operation 59 Miscellaneous menu Feature Option Description Restore on AC Power Loss Power On Power Off Selects the behavior a

Page 62

ETX-DC®/ BIOS Operation 60 MARS Interface Configuration Menu Feature Option Description MARS Disabled Auto SMB Charger SMB Selector Autodete

Page 63

ETX-DC®/ BIOS Operation 61 I2C Busses Configuration Menu Feature Option Description JIDA I2C Bus Speed Very high High Medium Slow Very slow U

Page 64 - Miscellaneous menu

ETX-DC®/ BIOS Operation 62 Watchdog menu Feature Option Description Active Trip Point Disabeled Reset NMI Selects the Mode of the Watchdog b

Page 65

ETX-DC®/ BIOS Operation 63 Remote Access Configuration Menu Feature Option Description Remote Access Enabled Disabled Disables and Enables

Page 66

ETX-DC®/ BIOS Operation 64 LAN Controller Feature Option Description Ethernet Controller Enabled Disabled Disable and Enables the onboard eth

Page 67 - Watchdog menu

ETX-DC®/ User Information 2 1.5 Warranty This Kontron Embedded Modules GmbH product is warranted against defects in material and workmanship

Page 68

ETX-DC®/ BIOS Operation 65 Trusted Computing Feature Option Description TCG/TPM SUPPORT Yes No Enable /Disable TPM TCG support in BIOS

Page 69 - LAN Controller

ETX-DC®/ BIOS Operation 66 PCIPnP Menu Feature Option Description Plug & Play O/S No Yes No: all devices are initialized by BIOS Yes: OS

Page 70 - Trusted Computing

ETX-DC®/ BIOS Operation 67 9.3.4 Boot Menu Feature Option Description 1st Boot Device Selects detected devices 2nd Boot Device Selects dete

Page 71 - PCIPnP Menu

ETX-DC®/ BIOS Operation 68 Boot Settings Configuration Menu Feature Option Description Quick Boot Enabled Disabled Disables or enables the qu

Page 72 - 9.3.4 Boot Menu

ETX-DC®/ BIOS Operation 69 9.3.5 Security Menu Feature Option Description Change Supervisor Password Type in Change User Password Type in

Page 73

ETX-DC®/ BIOS Operation 70 9.3.6 Chipset Configuration Menu

Page 74 - 9.3.5 Security Menu

ETX-DC®/ BIOS Operation 71 North Bridge Configuration Feature Option Description DRAM Frequency AUTO 400MHz 500 MHz Selects the DRAM Frequenc

Page 75

ETX-DC®/ BIOS Operation 72 Display Control Menu Feature Option Description DVMT Mode Select DVMT Mode Fixed Mode Combo Mode Selects the DVMT

Page 76 - North Bridge Configuration

ETX-DC®/ BIOS Operation 73 1080p25 1080p30 1080p50 1080p60 TV standard NTSC PAL SECAM SMPTE240M ITU-R television SMPTE295M SMPTE296M EIA-770.2

Page 77 - Display Control Menu

ETX-DC®/ BIOS Operation 74 Internal LVDS Configuration Feature Option Description Flat Panel Mode Auto Fixed Mode PAID FPID Auto: checks if t

Page 78

ETX-DC®/ Introduction 3 2 Introduction 2.1 ETX®-DC The ETX®-DC module brings latest 45 nm technology to the well-established ETX® 3.0 form f

Page 79 - Internal LVDS Configuration

ETX-DC®/ BIOS Operation 75 Soutbridge Configuration Menu Feature Option Description USB Function Disabled 2 USB Ports 4 USB Ports 6 USB Port

Page 80

ETX-DC®/ BIOS Operation 76 9.3.7 Exit Menu Corporate Offices Europe, Middle East & Afr i ca Oskar-von-Miller-Str. 1 8

Page 81

ETX-DC®/ Introduction 4 2.3 ETX® Benefits Embedded technology extended (ETX®) modules are very compact (~100mm square, 12mm thick), highly in

Commentaires sur ces manuels

Pas de commentaire